1 description typical applications technical data three pole, miniaturised, aircraft style thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (m-type to cbe to en 60934). an indicator band on the push button clearly shows the tripped/off position. threadneck panel mounted, available in metric and us (as 14154) configurations. advanced two-chamber design minimises contact contamination to provide fail-safe operation. temperature compensated with optional auxiliary contacts, and fully approved for use on a wide range of aircraft and equipment. various dummies are available without protective function, allowing connection of pre-installed wiring without loads. aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications systems. 583-... without auxiliary contact with auxiliary contact voltage rating 3 ac 200 v (300 hz to 800 hz); dc 28 v current rating range 1...30 a auxiliary circuit 0.5 a, dc 28 v typical life 20,000 operations mechanical 10,000 operations at i n ( 25 a) 4,000 operations at i n (30 a) ambient temperature -55...+125 c (-67...+257 f) 15 a -55...+90 c (-67...+194 f) > 15 a insulation co-ordination rated impulse pollution (iec 60664 and 60664a) withstand voltage degree 1.5 kv 3 dielectric strength (iec 60664 and 60664a) test voltage operating area ac 1,500 v pole/pole ac 1,500 v main to aux. circuit ac 1,500 v insulation resistance > 100 m (dc 500 v) interrupting capacity i cn 3 ac 200 v (400 hz): 4 a 1,000 a 5 a 2,000 a 7.5...25 a 2,500 a 30 a 1,500 a dc 28 v: 1...25 a 6,000 a 30 a 4,000 a degree of protection operating area ip40 (iec 60529/din 40050) terminal area ip00 vibration 10 g (57-2000 hz), 0.76 mm (5-57 hz) (sinusoidal) to vg 95210, sheet 19, iec 60068-2-6, test fc, iso 7137 vibration (random) 16.4 g rms, 0.2 g 2 hz 1.5 db, to vg 95210, sheet 29, iec 60068-2-6, test fc, iso 7137 acceleration 17 g, to iso 2669 shock 50 g (11 ms), to vg 95210, sheet 28, iec 60068-2-27, test ea, iso 7137 corrosion 96 hours at 5 % salt mist 48 hours at 20 % salt mist to vg 95210, sheet 2, iec 60068-2-11, test ka, iso 7137 humidity 240 hours at 95 % rh, to vg 95210, sheet 7, iec 60068-2-3, test c/iso 7137 explosion to vg 95210, sheet 10, mil-std-202, meth. 109 altitude 25,000 m above sea level mass max. 67 g with auxiliary contact max. 63 g without auxiliary contact mass reduction through aluminium threadneck approx. 3 g approvals standard current ratings and typical volt drop values current rating (a) volt drop per pole (mv) current rating (a) volt drop per pole (mv) 1 750 7.5 230 2 520 10 190 2.5 400 15 190 3 360 20 200 4 350 25 170 5 260 30 160 authority standard voltage ratings current ratings bw vg 95345, part 11 ac 115/200 v, 400 hz dc 28 v 1 a25 a 1 a25 a bw ln 29887 ac 115/200 v, 400 hz 5 a25 a dep. of the navy as14154 ac 115/200 v, 400 hz 1 a20 a qpl canada dep. of national defence vg 95345, part 11 ac 115/200 v, 400 hz dc 28 v 1 a25 a 1 a25 a qpl sweden defence material admin. ln 29887 ms 14154 ac 115/200 v, 400 hz dc 28 v 1 a25 a 1 a25 a qpl uk ministery of defence ln 29887 ac 115/200 v, 400 hz 5 a25 a airbus en 2996-004 ac 115/200 v, 400 hz 1 a25 a airbus en 2996-005 ac 115/200 v, 400 hz 1 a25 a high performance thermal circuit breaker 583-... www.e-t-a. de 1646 1
2 dimensions 583-g533-j1m1-b2s0xn (as14154) 1 1 46 46 1 11 4 1 11 1 16 6 4 max. 1.5 ?11.5 +0.2 45 12.8 45 max. 31 max. 19 off min. 11.9 on c1 b1 a1 terminals: a1, b1, c1 - input a2, b2, c2 - output teminal screw ms 51957-41 (8-32 unc-2a) with lock washer ms 35338-137 tightening torque max. 1.2 nm ?8.4 .331 min .118 max. .059 6.35 max. 35.1 ?10 7/16-32-un-2a thd tightening torque max. 3 nm 1.5 .394 .250 .059 .504 black white lock washer max. 1.22 max. 19.8 9.5 5 2 max. 46.7 sw14 current rating in a .079 max .780 0.8 location pin .374 .551 .031 max. 1.84 .098 8.5 .335 2.5 5 15 15 .197 .591 .591 max. 1.38 max .748 dimensions 583-g411-k1m1-a1s0tn (vg 95345 t11) .098 8.5 .335 2.5 5 15 15 .197 .591 .591 9.5 0.2 thickness 1.5 - 3 mm .059 - .118 in. max. 19.8 ?8.4 .331 3.5 .138 max. .059 6.35 6.5 on .256 12.8 36.5 max. 1.5 min. 4.6 mounting holes 45 45 31 38 12.5 off ?10 25.5 m12x1 c1 b1 a1 terminals: a1, b1, c1 - input a2, b2, c2 - output 9.5 5 2 max. 47 sw14 ?12.5 min. 50 min. 30 current rating in a ?3.2 +0.15 teminal screw iso 7045-m4x6 with lock washer din 137 b4 tightening torque max. 1.2 nm tightening torque max. 4 nm .126 +.006 .374 .008 .492 +.008 .079 1.5 .394 .492 .250 .059 min. .181 1.44 .504 1.50 1.00 black white lock washer max .780 0.8 location pin .374 .551 .031 max. 1.85 min. 1.97 min. 1.18 1.22 +0.2 ordering information for approved devices type no. 583 three pole, with temperature compensation mounting g threadneck panel mounting threadneck design 1 m12x1x6.4x8.8 dia. with mounting plate (aux. contact version) 3 mj12x1x6.4x8.8 dia. (only without aux. contact) 4 m12x1x6.4x8.8 dia. (only without aux. contact) 5 7/16-32unx6.4x7.8 (only without aux. contact) 7 7/16-32 unx6.4x7.8 dia. with mounting plate (aux.contact version) 8 m12x1x6.4x?8.8 with mounting plate, aluminium threadneck 9 m12x1x6.4x?8.8, aluminium threadneck hardware for threadneck (washers) 0 without hardware 1 corrugated washer 12/15, fitted 2 serrated lock washer 12.1/17.2, fitted 3 toothed washer 11.3/14.9, fitted 5 serrated lock washer 12.1/17.2, bulk shipped hardware for threadneck (nuts) 0 without hardware 1 hex nut m12x1 3 hex nut 7/16-32un 5 hex nut mj12x1 (only with threadneck design 3) 7 hex nut m12x1, aluminium, bulk shipped terminal design (main terminals) k screw terminals with metric thread 1 k14 (m4, mj4) j screw terminals with inch thread 1 j14 (8-32unc-2b) characteristic curve m1 thermal, 1.15-1.38 i n terminal screws a phillips screw m4x6 b phillips screw 8-32unc-2ax6 (ms 51957-41) k hex screw with phillips head 8-32unc-3ax7.6 l phillips screw mj4x6 z without accessories terminal washers 0 without lock washer 1 lock washer b4 2 lock washer 4.3 (ms 35338-137) 5 lock washer 4.3/9 auxiliary contact s0 without auxiliary contact s1 with auxiliary contact (n/c) (connector to en 3155-016m2018, size 20) s5 with polarized auxiliary contact (n/c) barrier t barrier 25.5 mm wide, 37.7 mm long (-s0 only) u barrier 19.5 mm wide, 37.7 mm long x barrier 19.5 mm wide, 34.1 mm long colour of the push button (blank) black (standard) (e.g. 7.5) g green to en (e.g. 7 1/2) n black to en (e.g. 7 1/2) current ratings 1...30 a 583 - g 4 1 1 - k 1 m1 - a 1 s0 t . - 5 a ordering example ordering information 583-g411-k1m1-a1s0tn (583-96-tc-k14) metric threadneck m12x1 and terminal design -k14 (m4x6), listed by the german materialamt der bundeswehr to vg 95345 t11. 583-g533-j1m1-b2s0xn (as 14154) threadneck size 7/16-32unsx6.4 and terminal design -j14 (inch thread 8-32), approved to as 14154. this is a metric design and millimeter dimensions take precedence ( mm ) inch high performance thermal circuit breaker 583-... www.e-t-a. de 1646 1
3 .098 current rating in a .059 ?8.4 .331 3.5 .138 m12x1 black white lock washer tightening torque max. 4 nm 8.5 .335 2.5 5 15 15 .197 .591 .591 terminals: a1, b1, c1 - input a2, b2, c2 - output 9.5 0.2 thickness 1.5 - 3 mm .059 - .118 in. mounting holes ?12.5 min. 50 min. 30 ?3.2 +0.15 .126 +.006 .374 .008 .492 +.008 min. 1.97 min. 1.18 sw14 45 max. 1.5 12.8 45 31 ?10 16.2 a2 b2 c2 5 45 19.5 max. 6.5 14.2 max. 10.5 aux. contact (connector to en 3155-016 m2018) 22 max. .059 6.35 6.5 on .256 38 12.5 off 9.5 teminal screw iso 7045-m4x6 with lock washer din 137 b4 tightening torque max. 1.2 nm 1.5 .394 .492 .250 .504 1.50 location pin .374 .551 1.22 .638 .768 max .256 max .413 .559 1.77 +0.2 dimensions 583-g111-k1m1-a1s1un (vg 95345 t11) internal connection diagrams b1 c1 a2 b2 c2 line a1 b2 c2 a1 b1 c1 3 4 line a2 b1 c1 a2 b2 c2 line a1 3 5 with auxiliary contact en 2996-004 with polarized auxiliay contact en 2996-005 b1 c1 a2 b2 c2 line a1 11 12 with auxiliary contact vg 95345 t11 typical time/current characteristics -55 c -67 f + 23 c + 73.4 f trip time in seconds +90 c +194 f ? times rated current 12 46 8 10 20 40 10000 1000 100 10 1 0. 1 0.01 0.001 60 80 100 high performance thermal circuit breaker 583-... www.e-t-a. de 1646 1 high performance thermal circuit breaker 583-...
4 accessories splash cover/hex nut assembly with o ring 66 6 4 x 200 801 08 nickel plated nut, transparent cover x 200 801 03 matt black finish nut, black cover x 200 801 09 matt black finish nut 7/16-32, black cover x 200 801 12 with blackened nut and transparent cover actuator extension 4 x 200 803 01 splash cover black/hex nut assembly with o ring 4 1 4 x 200 802 01 nickel plated nut x 200 802 02 matt black finish nut 11 1 16 1 11 lock out ring y 307 005 01 red y 307 005 02 black 1 1 146 4 identification collar y 307 004 01 black y 307 004 02 white y 307 004 03 red y 307 004 04 green y 307 004 05 blue 1 66 64 6 1 14 1 46 6 6 this is a metric design and millimeter dimensions take precedence ( mm ) inch all dimensions without tolerances are for reference only. in the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved. product markings may not be exactly as the ordering codes. errors and omissions excepted. high performance thermal circuit breaker 583-... www.e-t-a. de 1646 1
|
